Best METAL FILAMENT

Metal filled filaments contain very fine metal powder such as Copper, Bronze, Brass, and Stainless Steel. The percentage of metal powder infused in each filament can vary depending on the manufacturer.

The presence of this metal powder makes the filament much heavier than standard plastics. This means that the parts printed with metal-filled PLA will weigh significantly more than ones from the standard PLA, despite using the same settings and consuming the same amount of material. Metal filled filaments also tend to be very abrasive as they are extruded through the hotend. A standard brass nozzle will be too soft and will quickly wear down.

Be sure to upgrade to a wear resistant nozzle in order to print this filament effectively. There are other metal-like filaments in the market that may just have metallic coloring added to the filament. These filaments do not contain any actual metal powder, so they do not share many of the same benefits of the true metallic filaments. This article will focus on materials that contain actual metal powders for a realistic metallic weight and feel.

QUICK METAL FILAMENT GUIDE

  • Nozzle temperature: 210-230 °C (may vary)
  • Bed temperature: 20-60 °C (but not required)
  • Warping: Minimal
  • Shrinkage: Minimal
  • Print speed: Around 30 mm/s (may vary)
  • Strength: Medium
  • Flexibility: Very high
  • Durability: Very high
  • Abrasion resistance: Very high
  • Soluble: No
  • Hygroscopic: Yes
  • Food safe: No
  • Fumes: Minimal
  • Recommended extruder type: Direct drive (or Bowden with calibration)

BEST 3D METAL FILAMENT

Honuaki PLA filaments are a blend of polymers that combine to achieve a very fine and smooth finish. Very vivid and beautiful colors.

The resolution of the print is simply incredible. There are not visible lines. No warping at all.

After several tests of resistance and flexibility the PLA Honuaki filament still does not lose its integrity, it has enough hardness even to be PLA.

A leap in quality that we did not expect in the world of filaments.

Packaging:
5/5
Deformation:
5/5
Flexibility:
5/5
Durabilty:
5/5
Hardness:
5/5
Odor:
5/5
Quality:
5/5
Difficulty of use:
5/5
Price:
5/5
Score:
50%

PolyMaker PolyLite is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite covers the most popular 3D printing materials to meet your everyday needs in design and prototyping.

PolyLite PLA is a high-quality PLA designed for reliability and ease of printing.

We have found the hardness of this filament to be above average, but it does sacrifice quite a bit of print resolution.

The JAM-FREE technology works great, after many prints, no jams at all.

If you need filament with a hardness very similar to ABS but you do not need much resolution, it is a good option to consider.

Packaging:
5/5
Deformation:
5/5
Flexibility:
5/5
Durabilty:
5/5
Hardness:
5/5
Odor:
5/5
Quality:
5/5
Difficulty of use:
5/5
Price:
5/5
Score:
50%

Hatchbox makes filament using Ingeo PLA from NatureWorks, the company that Patrick Gruber co-founded to commercialize plant-based PLA.NatureWorks sources starchy plants to produce lactic acid, lactides and ultimately pellets of its Ingeo PLA.

The resolution is just like the average. Sometimes visible lines, sometimes not.

Packaging is a bit bad, does not seem to have been done carefully, tangles visible in different reels.

It is the most ecological and respectful option if you want to print without damaging the environment.


We have noticed that it takes a lot of work to stick to the heated bed, we had to use additional products to get proper adhesion.

Packaging:
5/5
Deformation:
5/5
Flexibility:
5/5
Durabilty:
5/5
Hardness:
5/5
Odor:
5/5
Quality:
5/5
Difficulty of use:
5/5
Price:
5/5
Score:
50%

MakerBot PLA is the best and most consistent filament for MakerBot Replicator Desktop 3D printers, It is a bioplastic derived from corn so is very eco friendly.

Every filament colour is comprehensively quality tested at both 100 micron and 200 micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you’re new to 3D printing, MakerBot PLA filament is a good material to start with because its easy to use and performs well on most prints. MakerBot PLA filament adheres well to acrylic and to MakerBot Build Plate Tape.

It a good filament but we have noticed that this filament is made specifically for Makerbot machines, which reduces a lot of reliability for those of us who have printers of many brands.

Packaging:
5/5
Deformation:
5/5
Flexibility:
5/5
Durabilty:
5/5
Hardness:
5/5
Odor:
5/5
Quality:
5/5
Difficulty of use:
5/5
Price:
5/5
Score:
50%

MakerBot PLA is the best and most consistent filament for MakerBot Replicator Desktop 3D printers, It is a bioplastic derived from corn so is very eco friendly.

Every filament colour is comprehensively quality tested at both 100 micron and 200 micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you’re new to 3D printing, MakerBot PLA filament is a good material to start with because its easy to use and performs well on most prints. MakerBot PLA filament adheres well to acrylic and to MakerBot Build Plate Tape.

It a good filament but we have noticed that this filament is made specifically for Makerbot machines, which reduces a lot of reliability for those of us who have printers of many brands.

Packaging:
5/5
Deformation:
5/5
Flexibility:
5/5
Durabilty:
5/5
Hardness:
5/5
Odor:
5/5
Quality:
5/5
Difficulty of use:
5/5
Price:
5/5
Score:
50%

MakerBot PLA is the best and most consistent filament for MakerBot Replicator Desktop 3D printers, It is a bioplastic derived from corn so is very eco friendly.

Every filament colour is comprehensively quality tested at both 100 micron and 200 micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you’re new to 3D printing, MakerBot PLA filament is a good material to start with because its easy to use and performs well on most prints. MakerBot PLA filament adheres well to acrylic and to MakerBot Build Plate Tape.

It a good filament but we have noticed that this filament is made specifically for Makerbot machines, which reduces a lot of reliability for those of us who have printers of many brands.

Packaging:
5/5
Deformation:
5/5
Flexibility:
5/5
Durabilty:
5/5
Hardness:
5/5
Odor:
5/5
Quality:
5/5
Difficulty of use:
5/5
Price:
5/5
Score:
50%

MakerBot PLA is the best and most consistent filament for MakerBot Replicator Desktop 3D printers, It is a bioplastic derived from corn so is very eco friendly.

Every filament colour is comprehensively quality tested at both 100 micron and 200 micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you’re new to 3D printing, MakerBot PLA filament is a good material to start with because its easy to use and performs well on most prints. MakerBot PLA filament adheres well to acrylic and to MakerBot Build Plate Tape.

It a good filament but we have noticed that this filament is made specifically for Makerbot machines, which reduces a lot of reliability for those of us who have printers of many brands.

Packaging:
5/5
Deformation:
5/5
Flexibility:
5/5
Durabilty:
5/5
Hardness:
5/5
Odor:
5/5
Quality:
5/5
Difficulty of use:
5/5
Price:
5/5
Score:
50%

MakerBot PLA is the best and most consistent filament for MakerBot Replicator Desktop 3D printers, It is a bioplastic derived from corn so is very eco friendly.

Every filament colour is comprehensively quality tested at both 100 micron and 200 micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you’re new to 3D printing, MakerBot PLA filament is a good material to start with because its easy to use and performs well on most prints. MakerBot PLA filament adheres well to acrylic and to MakerBot Build Plate Tape.

It a good filament but we have noticed that this filament is made specifically for Makerbot machines, which reduces a lot of reliability for those of us who have printers of many brands.

Packaging:
5/5
Deformation:
5/5
Flexibility:
5/5
Durabilty:
5/5
Hardness:
5/5
Odor:
5/5
Quality:
5/5
Difficulty of use:
5/5
Price:
5/5
Score:
50%

MakerBot PLA is the best and most consistent filament for MakerBot Replicator Desktop 3D printers, It is a bioplastic derived from corn so is very eco friendly.

Every filament colour is comprehensively quality tested at both 100 micron and 200 micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you’re new to 3D printing, MakerBot PLA filament is a good material to start with because its easy to use and performs well on most prints. MakerBot PLA filament adheres well to acrylic and to MakerBot Build Plate Tape.

It a good filament but we have noticed that this filament is made specifically for Makerbot machines, which reduces a lot of reliability for those of us who have printers of many brands.

Packaging:
5/5
Deformation:
5/5
Flexibility:
5/5
Durabilty:
5/5
Hardness:
5/5
Odor:
5/5
Quality:
5/5
Difficulty of use:
5/5
Price:
5/5
Score:
50%

MakerBot PLA is the best and most consistent filament for MakerBot Replicator Desktop 3D printers, It is a bioplastic derived from corn so is very eco friendly.

Every filament colour is comprehensively quality tested at both 100 micron and 200 micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you’re new to 3D printing, MakerBot PLA filament is a good material to start with because its easy to use and performs well on most prints. MakerBot PLA filament adheres well to acrylic and to MakerBot Build Plate Tape.

It a good filament but we have noticed that this filament is made specifically for Makerbot machines, which reduces a lot of reliability for those of us who have printers of many brands.

Packaging:
5/5
Deformation:
5/5
Flexibility:
5/5
Durabilty:
5/5
Hardness:
5/5
Odor:
5/5
Quality:
5/5
Difficulty of use:
5/5
Price:
5/5
Score:
50%

MakerBot PLA is the best and most consistent filament for MakerBot Replicator Desktop 3D printers, It is a bioplastic derived from corn so is very eco friendly.

Every filament colour is comprehensively quality tested at both 100 micron and 200 micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare and MakerBot Desktop software offer. If you’re new to 3D printing, MakerBot PLA filament is a good material to start with because its easy to use and performs well on most prints. MakerBot PLA filament adheres well to acrylic and to MakerBot Build Plate Tape.

It a good filament but we have noticed that this filament is made specifically for Makerbot machines, which reduces a lot of reliability for those of us who have printers of many brands.

Packaging:
5/5
Deformation:
5/5
Flexibility:
5/5
Durabilty:
5/5
Hardness:
5/5
Odor:
5/5
Quality:
5/5
Difficulty of use:
5/5
Price:
5/5
Score:
50%
Zara

Grey bucket bag
$139 $99

Zara

Oversized jacket
$120 $79

Chloe

Leather box bag
$820 $679

D&G

White micro bag
$799 $499

Marc Jacobs

Oversized striped jacket
$520 $299

Timberland

Leather boots
$120 $79

Adidas originals

Yellow shopping bag
$999 $699

Chloe

Fancy heels
$679

Adidas originals

Yellow oversized summer dress
$1320 $899

Share on facebook
Share on Facebook
Share on twitter
Share on Twitter
Share on pinterest
Share on Pinterest
Share on whatsapp
Share on WhatsApp